Series V15

( mini size )
download V-Protect Product code: V15-L-XX

HEAT SHRINK FIBER OPTIC SPLICE PROTECTORS

Series V15

Part No.D1 / D2LdDpLpEN 50411-3-3
V15-15-XX1,5 / 1,6150,50,515S1-16-15-P-XX6
V15-20-XX1,5 / 1,6200,50,520S1-16-20-P-XX6
V15-25-XX1,5 / 1,6250,50,525S1-16-25-P-XX6
V15-30-XX1,5 / 1,6300,50,530S1-16-30-P-XX6
V15-35-XX1,5 / 1,6350,50,535*
V15-40-XX1,5 / 1,6400,50,540S1-16-40-P-XX6
V15-45-XX1,5 / 1,6450,50,545*
All dimensions in mm. Other lengths are available on request. * – Product not defined by the standard.

D – Outer diameter after recovery
L – Length after recovery
d – Hole diameter before recovery
Dp – Pin diameter
Lp – Pin length
XX – Color

S1Heat shrink single fiber
P
Primary coated 125/200µm or 125/250µm
XX6
Color according to EN 50411-3-3

PRODUCT IN VIPro PROGRAM

The product is covered by the VIPro Loyalty Program.
For each ordered package of 1000 pcs you get 5 VIPro points.

AVAILABLE COLORS

XX – color description – XX6
00 – transparent – 00

FULL COLORS
01 – black – 10
02 – brown – 11
03 – red – 03
04 – orange – 07
05 – yellow – 02
06 – green – 05


07 – blue – 01
08 – purple – 06
09 – grey – 08
10 – white – 04
11 – pink – 12
12 – turquoise – 09

TRANSPARENT COLORS
51 – black
52 – brown
53 – red
54 – orange
55 – yellow
56 – green


57 – blue
58 – purple
59 – grey
61 – pink
62 – turquoise

Other colors are available on request.

HOW TO ORDER

V12-35-00(100) – 100pcs packed to one zip-bag (Standard packing)
V12-35-00(50) – 50pcs packed to one zip-bag
 Other packing method are available on request.

PACKING

The carton contains 1000 pcs fiber optic splice protectors. Standard packing consists of 10 zip-bags with 100pcs of protectors each.
Other packaging methods are available on request.

PRODUCT DESCRIPTION

V15 MINI series sleeves were constructed to meet the requirements of companies producing WDM, CWDM and DWDM mini-modules, splitters etc. to protect splices of optical elements. They are used where very little space for assembly is available. Small size and quickness of assembly are the main advantages of this solution. Excellent climatic and thermal properties make it ideal for use in closed as well as open spaces. The main goals during design phase were: full protection of the fiber optic splices, small size after recovery and short assembly time. Initial shrinking of the outer tube was taken into account during the production process to reduce the gap between the tubes. This protects the internal tube and Pin from falling out as well as facilitates entering the optical fiber to hole. The final product is checked to meet the requirements set by the EN 50411-3-3 European Standard and GR-1380-CORE American Standard and ZN-96TPSA-006 standard of Polish Telecommunications. The sleeves we produce offer full protection to the fiber optic splices. They do not cause additional insert losses, and they offer protection against mechanical damage, pollution and weather conditions.

V15 series is characterized by small external diameter (D=1.5mm after recovery), reduced length (the shortest L=15mm), quickness of assembly (below 40s). The sleeves consists of: a 0.5mm diameter Pin, a thin external tube, and an internal tube with a 0.5mm hole. The protectors are dedicated to primary coated 250µm. The internal tube is made from special material with good adhesion to many materials and low solubility in water. It changes its consistency to semi-liquid in growth temperatures. It enables to eliminate air bubbles through filling up the spaces between the external tube, the Pin and fiber an optical cable. The Pin that stiffens the splice is made from steel with a heat extensibility indicator identical to that of optic fiber. This prevents from longitudinal stresses on the splice during heating process. Longitudinal stresses of the splice influence on growth an insert loss and a reflection loss. In extreme cases they may cause breaking the connection, which makes it necessary to repeat the splice procedure. External tube material guarantees sustainability and resistance to stretching and puncture. It offers optimal air permeability, high gloss and smooth surface.

PRODUCT PROPERTIES

  • Outer diameter after recovery: 1,5 / 1,6 mm +/- 0,1mm *
  • Hole diameter before recovery: 0,5 mm + 0,1mm *
  • Lenght of the protector after recovery: L +2/-1mm *
  • Pin diameter: 0,5 mm
  • Minimum installation temperature: 110 °C
  • Max installation time: 60 seconds
  • Standard color: transparent
  • RoHS compliant
  • Packing: 100pcs packed to one zip-bag (other packing method available on request)

* – Tolerances in accordance with the requirements of EN 50411-3-3

REFERENCES

European standard EN 50411-3-3

  • Criterion 8.3.1: EN 61300-3-3; Change in attenuation: 1310&1550nm δIL ≤ ±0,1dB per circuit of 5 protected fusion splices
  • Criterion 8.3.3: EN 61300-1-1; Vibration: 10-50Hz, amplitude 0,75mm, 15 cycles, 1550nm δIL ≤ ±0,2dB durin -, δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices
  • Criterion 8.3.5: EN 61300-2-5, Torsion: magnitude of load 2N, rotation angle +/- 180°, 10 cycles, 1310&1550&1625nm δIL ≤±0,1dB after – per circuit of 5 protected fusion splices,
  • Criterion 8.3.6: EN 61300-2-4, Fiber/Cable retention: magnitude of load 2N, 60s, 1 cycle, 1310&1550&1625nm δIL ≤±0,1dB after – per circuit of 5 protected fusion splices,
  • Criterion 8.3.7: EN 61300-2-7, Bending: magnitude of load 2N, 5s, 1 cycle, 1310&1550&1625nm δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices,
  • Criterion 8.3.8: EN 61300-2-17, Cold: -40°C, 96h, 1310&1550nm δIL ≤ ±0,2dB durin -, δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices
  • Criterion 8.3.9: EN 61300-2-18, Dry heat: +80°C 96h, 1310&1550nm δIL ≤ ±0,2dB durin -, δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices
  • Criterion 8.3.10: EN 61300-2-19, Damp heat: from +25°C to +55°C, 93%Rh, 4 cycles, 96h 1310&1550nm δIL ≤ ±0,2dB durin -, δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices
  • Criterion 8.3.11: EN 61300-2-22, Change of temperature: from -40°C to +70°C, 12 cycles, 68h, 1310&1550nm δIL ≤ ±0,2dB durin -, δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices
  • Criterion 8.3.12: EN 61300-2-26; Salt mist: concentration NaCl 5%, +35°C 96h 6.5÷7.2PH, 1 cycle, 1310&1550&1625nm δIL ≤ ±0,1dB after – per circuit of 5 protected fusion splices. Additionally, there are no noticeable significant differences in the appearance of the tested product, such as traces of rust, discoloration, deformation.

MOVIES

Strona korzysta
z plików Cookies.
Korzystając ze strony wyrażasz zgodę na ich używanie.