|Part No.||D||L||d||EN 50411-3-3|
D – Outer diameter after recovery
L – Length after recovery
d – Hole diameter before recovery
XX – Color
S1 – Heat shrink single fiber
A – Primary coated 250µm(fiber) or secondary coated 900µm (buffer)
XX6 – Color according to EN 50411-3-3
XX – color description – XX6
00 – transparent – 00
01 – black – 10
02 – brown – 11
03 – red – 03
04 – orange – 07
05 – yellow – 02
06 – green – 05
07 – blue – 01
08 – purple – 06
09 – szary – 08
10 – white – 04
11 – pink – 12
12 – turquoise – 09
51 – black
52 – brown
53 – red
54 – orange
55 – yellow
56 – green
57 – blue
58 – purple
59 – grey
61 – pink
62 – turquoise
Other colors available on request.
VFX-35-00(100) – 100pcs packed to one zip-bag (Standard packing)
VFX-35-00(50) – 50pcs packed to one zip-bag
* Other packing method are available on request.
The carton contains 1000 pcs fiber optic splice protectors. Standard packing consists of 10 zip bags with 100pcs of protectors each.
Other packaging methods are available on request.
VFX FLEX series sleeves are applied in production of In-line attenuators and mode conditioning patch cords (MCP). In order to reduce sleeve diameter after shrinking the PIN was removed. Connection stiffness is provided by a thick external tube. These sleeves are used where very little space for assembly is available. Small size is the main advantage of this solution. Excellent climatic and thermal properties make it ideal for use in closed as well as open spaces. The main goals during design phase were: full protection of the fiber optic splices and small size after shrinking. Initial shrinking of the sleeve was taken into account during the production process to reduce the gap between the tubes. This protects the internal tube from falling out as facilitates entering the optical fiber to hole. The final product is checked to meet the requirements set by the EN 50411-3-3 European Standard and GR-1380-CORE American Standard and
ZN-96TPSA-006 standard of Polish Telecommunications. The sleeves we produce offer full protection to the fiber optic splices. They do not cause additional insert losses, and they offer protection against mechanical damage, pollution and weather conditions.
VFX series is characterized by small external diameter (D=2.3mm after shrinking), reduced length (the shortest L=25mm). The sleeve consist of: an external tube with thickened wall and an internal tube with a 1.4mm hole. The protectors are dedicated to primary coated 250µm (fiber) or secondary coated 900µm (buffer).The internal tube is made from special material with good adhesion to many materials and low solubility in water. It changes its consistency to semi-liquid in growth temperatures. This enables the space between the inner wall of the outer sheath and the optical fibre to be thoroughly filled, eliminating the formation of air bubbles. The outer sheath material guarantees durability as well as tensile and puncture resistance. It is characterised by optimum air permeability, high gloss and a smooth surface.
* – Tolerances in accordance with the requirements of EN 50411-3-3
European standard EN 50411-3-3